Timken

1-5/8" Spherical Ball Bearing Insert w/Eccentric Locking Collar RA110RRB

These bearings are an extended inner-ring type with a self-locking collar Due to the positive contact, the land-riding R-seal provides improved protection against harmful contaminants and retains...

1-5/8" Spherical Ball Bearing Insert w/Eccentric Locking Collar SM1110KB

Standard SM series A and B have the same ring tolerances and corner radii as equivalent 200-series single-row radial ball bearings Type A has cylindrical outside diameters; type B has spherical...

1-5/8" Spherical Ball Bearing Insert w/Eccentric Locking Collar SMN110KB

SMN series types A and B have the same ring tolerances and corner radii as equivalent 300-series single-row radial ball bearings Type A has cylindrical outside diameters; type B has spherical outside...

1-5/8" Spherical Ball Bearing Insert w/Set Screws GY1110KRRB SGT

Incorporates Shaft Guarding Technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft The Y-series set screw bearing has increased shaft support for...

1-5/8" Spherical Ball Bearing Insert w/Set Screws GYA110RRB

GYA-RR-series bearings are dimensionally interchangeable with the YA-RR series Both series have cylindrical outside diameters and can be used in standard cylindrical housings GYA-RRB series have...

1-5/8" Spherical Ball Bearing Insert w/Set Screws YA110RRB

These bearings are an extended inner-ring type and have specially designed set screws with unique thread form The thread form in both series locks the bearing to the shaft so they are resistant to...

1-5/8" Stamp Steel Eccentric Locking Collar Flange Block Assembly RA1 5/8

The RA flangette unit is similar to Timken Fafnir RR flangette unit The unit consists of two interchangeable, pressed-steel, zinc plated flanges that house a standard ball bearing The unit...

1-5/8" Stamp Steel Eccentric Locking Collar Flange Block Assembly RR1 5/8

The unit consists of two interchangeable, pressed-steel, zinc-plated flanges housing a standard bearing with a self locking collar The spherical inside surfaces of each pair of flanges mate with the...

1-5/8" Timken SRB Replacement End Cover Triple Lip Nitrile Seal DR110

The DR Replacement Seals The low speed triple lip DR seal can move within a cover or backing plate opening to accommodate misalignment while maintaining full contact to the shaft for positive...

1-5/8" Two Bolt Self-Aligning Taper Roller Bearing Pillow Block - Double Locking Collar - Expansion ESA-P2B-TRB-1 5/8 E

TIMKEN® TYPE-E HOUSED UNITS Timken® Type-E tapered roller bearing housed units feature double-lip seals and locking collars that protect against water and other contaminants. This double-lip seal...

1-5/8" Two Bolt Self-Aligning Taper Roller Bearing Pillow Block - Double Locking Collar - Non Expansion ESA-P2B-TRB-1 5/8

TIMKEN® TYPE-E HOUSED UNITS Timken® Type-E tapered roller bearing housed units feature double-lip seals and locking collars that protect against water and other contaminants. This double-lip seal...

1-5/8" Two Bolt Self-Aligning Taper Roller Bearing Pillow Block - Single Locking Collar - Expansion ESA-P2BA-TRB-1 5/8 E

TIMKEN® TYPE-E HOUSED UNITS Timken® Type-E tapered roller bearing housed units feature double-lip seals and locking collars that protect against water and other contaminants. This double-lip seal...