Toggle menu
204-785-8954
  • Series 7600 Butterfly Valve 2"
  • Series 7600 Butterfly Valve 2"
  • Series 7600 Butterfly Valve 2"

    • Series 7600 Butterfly Valve 2"

    Gruvlok

    $0.00
    (No reviews yet) Write a Review
    SKU:
    GRV SERIES7600VLVX2
    Weight:
    0.00 LBS
    Body material:
    Epoxy coated, ASTM A 536
    Disc type:
    EPDM or nitrile
    Lower stem:
    AISI 410
    Upper stem:
    AISI 410
    Stem o-ring:
    Nitrile
    Latch plate:
    Zinc plated, ASTM A 228
    Nuts:
    ASTM A563
    Handle:
    Zinc Plated, ASTM A 619

    Product Description

  • The versatile Series 7600 Grooved-End Butterfly Valve has features that can satisfy a wide range of service requirements and allow it to be used with a diverse range of fluids. Its ductile iron body is epoxy coated to resist atmospheric attack, and the elastomer encapsulated disc can be ordered with EPDM or Nitrile materials. Rugged enough to take the punishment, yet the Series 7600 Valve is light in weight for easy handling and installation.
  • The Series 7600 Valve is rated 200 PSI (13.8 bar) to full vacuum, at temperatures from 0° to 150° F (-17.8° to 65.6° C). Every valve is seat tested to 110% of rated pressure. Not intended for use in potable water systems.

  • BODY: One-piece ductile iron, fully epoxy coated – light weight for easy handling.
  • DISC: Streamlined profile for maximum flow and minimal seat wear. The ductile iron disc is available with a choice of EPDM or Nitrile coverings.
  • STEM/DISC ATTACHMENT: A splined interference fit creates a permanent rigid connection between the disc and stem, and eliminates the need for pins or bolts in the flow way.
  • STEM: Two-piece design for maximum flow. Top stem is Double D, giving positive indication of disc position at all times.
  • STEM SEAL: The interference between the rubber covered disc hub and the smooth, epoxy coated body provides the primary stem seal. O-rings on both upper and lower stems provide a secondary seal.
  • HANDLE: Two position on/off handle is standard.TESTING AND CONFORMANCE: Testing to MSS SP-67. Grooved ends conform to the requirements of AWWA C606 for steel pipe.

    adobepdficon.png Gruvlok Catalog

    • Product Videos

    Custom Field

    Body material Epoxy coated, ASTM A 536
    Disc type EPDM or nitrile
    Lower stem AISI 410
    Upper stem AISI 410
    Stem o-ring Nitrile
    Latch plate Zinc plated, ASTM A 228
    Nuts ASTM A563
    Handle Zinc Plated, ASTM A 619

    Product Reviews

    Write a Review