Sprockets

Hardened Plain Bore Double Tooth Sprocket D35B13H

This double sprocket is typically attached to the shaft using a "keyway and two set screws". These sprockets are listed with their "rough stock bores" but can have other shaft sizes machined into them by either Power-Link or the end user. This sprocket...

Hardened Plain Bore Double Tooth Sprocket D35B12H

This double sprocket is typically attached to the shaft using a "keyway and two set screws". These sprockets are listed with their "rough stock bores" but can have other shaft sizes machined into them by either Power-Link or the end user. This sprocket...

Steel Y-Series Split-to-Bolt Hubs QW29375

Make your own split sprockets by welding your type A plate sprocket to the Split-to-Bolt hub. Bore the shaft to size, and cut the unit in half so it can be installed without having to slide down the shaft. These are currently solid as a one piece unit...

Steel Y-Series Split-to-Bolt Hubs QW19375

Make your own split sprockets by welding your type A plate sprocket to the Split-to-Bolt hub. Bore the shaft to size, and cut the unit in half so it can be installed without having to slide down the shaft. These are currently solid as a one piece unit...

Steel Shear Bolt Sprocket Assembly SB8012P

Power-Link Catalog 

Steel Shear Bolt Sprocket Assembly SB6012HB

Power-Link Catalog 

Steel Shear Bolt Sprocket Assembly SB6012H

Power-Link Catalog 

Steel Shear Bolt Sprocket Assembly SB5012E

Power-Link Catalog 

Steel Weld-On Conveyor Sprocket 88HR14

Please note that 88 series sprockets fit the following chain series: H78, H78RT, WR78, H74, 81X, C188, SS188, 88K Welding tip: When attaching any weld-on hub to a plate sprocket, place 3 small tack welds in a triangular pattern and let cool. Check for...

Steel Weld-On Conveyor Sprocket 88HR12

Please note that 88 series sprockets fit the following chain series: H78, H78RT, WR78, H74, 81X, C188, SS188, 88K Welding tip: When attaching any weld-on hub to a plate sprocket, place 3 small tack welds in a triangular pattern and let cool. Check for...

Steel Weld-On Conveyor Sprocket 88HQ14

Please note that 88 series sprockets fit the following chain series: H78, H78RT, WR78, H74, 81X, C188, SS188, 88K Welding tip: When attaching any weld-on hub to a plate sprocket, place 3 small tack welds in a triangular pattern and let cool. Check for...

Steel Weld-On Conveyor Sprocket 88HQ12

Please note that 88 series sprockets fit the following chain series: H78, H78RT, WR78, H74, 81X, C188, SS188, 88K Welding tip: When attaching any weld-on hub to a plate sprocket, place 3 small tack welds in a triangular pattern and let cool. Check for...