Crimp Fittings

3/16 x 1/4" Pulsar Brass 9000 Series Hose Crimp - Female 37° JIC Swivel 9005SB-04-03

Grease whips provide a flexible connector between the grease gun and grease fitting to allow easier access to the tight and awkward spaces where grease nipples always seem to be located.Male pipe (NPTF) threaded fittings come complete with ball seats to...

1/4 x 1/4" Pulsar 8700 Series Recorder Hose - Male NPT 8716-04-04

These couplings are used with 116 recorder hose.Recorder hose assemblies are used to record data during well fracturing operations.All fittings are factory installed and must be tested to 1-1/2 times working pressure before use in the field. Pulsar...

1/4" Pulsar 8700 Series Recorder Hose Ferrule 8700-04

These couplings are used with 116 recorder hose.Recorder hose assemblies are used to record data during well fracturing operations.All fittings are factory installed and must be tested to 1-1/2 times working pressure before use in the field. Pulsar...

2 x 2" (3.13" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-32-32

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1-1/2 x 1-1/2" (2.50" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-24-24

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1-1/4 x 1-1/2" (2.50" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-24-20

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1-1/4 x 1-1/4" (2.13" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-20-20

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1 x 1-1/4" (2.13" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-20-16

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1 x 1" (1.88" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-16-16

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

3/4 x 3/4" (1.63" Flange) Pulsar 8600 Series Hose Barb - Code 62 Flange 90° Elbow 8699H-12-12

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1-1/4 x 1-1/4" (2.13" Flange) Pulsar 8600 Series Hose Barb - CAT® Style Flange 90° Elbow 8699C-20-20

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...

1 x 1-1/4" (2.13" Flange) Pulsar 8600 Series Hose Barb - CAT® Style Flange 90° Elbow 8699C-20-16

Interlock fittings are so-named because the wire reinforcement of the hose is mechanically locked between the ferrule and the insert.This is accomplished by skiving the cover and the end section of the tube, so that during the crimping process, the bare...