Sleeves

5/8" Lead Free Brass Poly Tube Compression Support Insert LF-481-10

Click this link to view a helpful CGA gas fitting reference chartLead free refers to the wetted surface of pipe, fittings, and fixtures in potable water systems that have an average weighted lead content less than or equal to 0.25% Fairview General...

3/8" Brass Compression Nut w/Captured Sleeve 61CS-6

If you ever need to terminate and seal off of a compression fitting and do not have the correct fitting such as the Fairview 61CAP- series, you can use a suitably sized metalic ball bearing between the compression nut and fitting instead of the crush...

1/4" Brass Compression Nut w/Captured Sleeve 61CS-4

If you ever need to terminate and seal off of a compression fitting and do not have the correct fitting such as the Fairview 61CAP- series, you can use a suitably sized metalic ball bearing between the compression nut and fitting instead of the crush...

1/2" Brass Metal Line Compression Sleeve 60-8

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

7/16" Brass Metal Line Compression Sleeve 60-7

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

3/8" Brass Metal Line Compression Sleeve 60-6

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

5/16" Brass Metal Line Compression Sleeve 60-5

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

1/4" Brass Metal Line Compression Sleeve 60-4

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

3/16" Brass Metal Line Compression Sleeve 60-3

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

5/32" Brass Metal Line Compression Sleeve 60-2-1/2

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

1/8" Brass Metal Line Compression Sleeve 60-2

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

7/8" Brass Metal Line Compression Sleeve 60-14

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...