Bearings

1/2" Cylindrical Ball Bearing Insert w/Eccentric Locking Collar 1008KRR

Designed for extremely dirty or wet conditions Feature R-seals with flared lips that firmly contact the ground O D of the inner ring R-seals provide a positive seal against dirt and other contaminants, while effectively retaining the lubricant Equipped...

1 x 1-1/4 x 25.65mm Needle Bearing Inner Ring LRB 162016

Amcan® inner rings are heat-treated and finished by grinding to a high degree of accuracy. In the case of needle roller bearings, normally, the shafts are heat-treated and finished by grinding, and used as the raceway surfaces. However, when it is...

3/4 x 1 x 25.65mm Needle Bearing Inner Ring LRB 121616

Amcan® inner rings are heat-treated and finished by grinding to a high degree of accuracy. In the case of needle roller bearings, normally, the shafts are heat-treated and finished by grinding, and used as the raceway surfaces. However, when it is...

3/4 x 1 x 19.3mm Needle Bearing Inner Ring LRB 121612

Amcan® inner rings are heat-treated and finished by grinding to a high degree of accuracy. In the case of needle roller bearings, normally, the shafts are heat-treated and finished by grinding, and used as the raceway surfaces. However, when it is...

3-7/16" Taconite Bearing Block Seal TA520/3-7/16

TACONITE SEALS (TA) Taconite seals are a combination of both a labyrinth seal and V-ring seal. The labyrinth seal is made up of two separate metal ring components, inner and outer, that have interconnecting grooves that form a labyrinth gap. The outer...

3-7/16" Labyrinth Bearing Block Seal LO520/3-7/16

LABYRINTH SEALS (LO) Labyrinth seals are made up of a single metal ring component that interconnects with the grooves in the housing to form a labyrinth gap. The inside diameter of the metal ring contains an O-ring that creates an interference fit with...

10 x 30 x 9mm Single Row Angular Contact Ball Bearing 7200 BTN1

Timken® angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum...

Inch TH Series Dryslide PTFE Cylindrical Bushing 26TH12

TH Dryslide consists of a carbon steel backing, an intermediate layer of sintered bronze, and finally the PTFE based sliding lining that actually contacts the sliding surface. Dryslide has a low coefficient of friction, good wear properties and sliding...

5/8 x 1-3/8" Flanged Utility Wheel Bearing BCPBF58138

5/8 x 1-3/8" flanged utility wheel bearingUsed extensively for lawn and garden equipment, mower wheel applications, wheel barrows, utility carts, chain link fence wheels, hand trucks, etc.

3/4 x 1-3/8" Flanged Utility Wheel Bearing BCPBF34138

5/8 x 1-3/8" flanged utility wheel bearingUsed extensively for lawn and garden equipment, mower wheel applications, wheel barrows, utility carts, chain link fence wheels, hand trucks, etc.

1/2 x 1-3/8" Flanged Utility Wheel Bearing BCPBF12138

5/8 x 1-3/8" flanged utility wheel bearingUsed extensively for lawn and garden equipment, mower wheel applications, wheel barrows, utility carts, chain link fence wheels, hand trucks, etc.

45x75x32 Double Row Ball Bearing 45BG07S5AIG-2DS

This bearing is commonly installed in air conditioner compressors and fan clutches on various automotive vehicles