Paulin

1" Zinc Plated Lock Washer 375 Pc. B157-030

Lock washers known as split lock washers are engineered to provide a more uniform load distribution. Ideal for situations where potential loosening from corrosion or vibration is a concern. Lock...

1" Zinc Plated S.A.E Flat Washer 20 Pc. 154-030

SAE washers provide a standard bolt size inside diameter with a smaller O.D. SAE washers are ideal where washer space is limited. SAE sizes are designated by the bolt diameter they are intended to...

1" Zinc Plated S.A.E Flat Washer 40lbs. B150-030

SAE washers provide a standard bolt size inside diameter with a smaller O.D. SAE washers are ideal where washer space is limited. SAE sizes are designated by the bolt diameter they are intended to...

1" Zinc Plated Spacer Washer 50 Pc. 162-930

Spacer washers are 1/32" thick. Commonly used on axles, and shafts to space between cotter pins, lock nuts, hitch pin clips and hitch pins or to take up slack between machinery parts. Minimizes wear...

1"-14 UNF 18.8 Stainless Steel Hex Nut 10 Pc. 5027-030

Hex nuts are used with a screw or bolt to fasten two or more parts. 18.8 stainless steel fasteners have excellent corrosion resistant qualities and are an excellent choice for general use and all...

1"-14 UNF Bare Hex Double Nut 12 Pc. 102-030

Finished high hex nuts are 50% thicker than standard hex nuts and are also known as collar nuts. Fine threaded double thickness fasteners are typically stronger than coarse threaded fasteners of the...

1"-14 UNF Bare Hex Double Nut 150 Pc. B102-030

Finished high hex nuts are 50% thicker than standard hex nuts and are also known as collar nuts. Fine threaded double thickness fasteners are typically stronger than coarse threaded fasteners of the...

1"-14 UNF Bare Hex Jam Nut 20 Pc. 107-030

Jam nuts are tightened against each other instead of against a material. They are about half of the size of a regular nut. Bare finish fasteners have low corrosion resistance and are a good choice...

1"-14 UNF Bare Hex Jam Nut 225 Pc. B107-030

Jam nuts are tightened against each other instead of against a material. They are about half of the size of a regular nut. Bare finish fasteners have low corrosion resistance and are a good choice...

1"-14 UNF Grade 2 Bare Hex Nut 135 Pc. B082-030

Hex nuts are used with a screw or bolt to fasten two or more parts. The grade of the nut should be the same as or greater than that of the mating screw, bolt, or rod. Nuts can be coarse, fine or...

1"-14 UNF Grade 2 Bare Hex Nut 20 Pc. 082-030

Hex nuts are used with a screw or bolt to fasten two or more parts. The grade of the nut should be the same as or greater than that of the mating screw, bolt, or rod. Nuts can be coarse, fine or...

1"-14 UNF Grade 2 Zinc Plated Hex Nut 135 Pc. B084-030

Hex nuts are used with a screw or bolt to fasten two or more parts. Grade 2 is regular strength for everyday use. Zinc plated fasteners have good corrosion resistant qualities and are a good choice...