Greenline

5" Silicone Coolant Hose G384-500

Silicone is one of the most stable rubbers.It remains flexible and resists aging after prolonged exposure to extreme temperatures, weather, and ozone.This long-lasting property yields hoses that...

5" Softwall Marine Coolant/Exhaust Hose G388-500

G388 is for straight connections in engine cooling and wet exhaust applications and has the same features as G381 but without the helix wire.It is particularly useful where installation space is...

5" Stainless J-Lock Clamp J215

The stainless steel J-Lock clamps are available in 3/8", 1/2", 5/8", and 3/4" band widths with sizing ranging from 3/16" inner diameter all the way up to 6".These non-punch type clamps are secured by...

5" Stainless Open End Punch Clamp PCO-20S

Open end punch clamps are of the same construction as our preformed clamps with the exception of being double wrapped and held to a specific diameter.Open end punch clamps are used when a fitting...

5" Stainless Punch Clamp PC-20S

The punch clamps are double wrapped and formed to a given diameter, with sizes ranging from 13/16" ~ 8" inner diameter.All of these clamps can be pulled down to a smaller diameter using a punch clamp...

5" Stainless Steel Worm Gear Hose Clamp G8-80

The Greenline G8 series clamps are completely stainless steel. The G8M clamps have a 5/16" wide type 301 stainless band with a type 410 stainless screw. G8 clamps have a 1/2" wide, 300 series...

5" Steel Worm Gear Hose Clamp G7-80

The Greenline G7 series clamps are popular in the automotive industry, and feature a stainless band and screw housing with a plated carbon steel screw. G7M bands are 5/16" wide, and G7 bands are 1/2"...

5" Thermoplastic Rubber Ducting Hose TPR-500

The thermoplastic rubber ducting is constructed from the highest grade material available.The resulting product has great ozone, ultra-violet, and weathering resistance.TPR duct is well suited to...

5" Thermoplastic Urethane Ducting Hose TPU-500

Where standard ducting does not give satisfactory life due to the abrasive product being conveyed, polyurethane ducting takes over.Urethane not only provides many times the wear resistance of regular...

5" TPR Bulk Material Hose G1340C-500

G1340C has a thermoplastic rubber liner that combines the advantages of rubber and PVC.This hose is typically used in dry applications, particularly grain vacuum.G1340C offers good abrasion...

5" TPR Bulk Material Hose G1341C-500

G1341C has a thermoplastic rubber liner that combines the advantages of rubber and PVC.This hose is usually seen in the fall on municipal vacuum trucks where it is used to remove leaves and debris...

5" Urethane Bulk Material Hose G1741-500

G1741 is for suction, discharge, and pneumatic transfer of abrasive materials.Urethane Bulk Material hose is recommended for sand and shot blast recovery lines, grain handling, roof rock cleaning,...