Greenline

4" Single Pin Sanitary Clamp w/ Cross Hole G53C-400

There are a dozen or more designs of sanitary fittings that have been developed independently around the world.One of the most common in our market area is clamp fittings, also referred to as...

4" Softwall Marine Coolant/Exhaust Hose G388-400

G388 is for straight connections in engine cooling and wet exhaust applications and has the same features as G381 but without the helix wire.It is particularly useful where installation space is...

4" Square Hole Trash Strainer G34SQ-400

G34SQ strainers are made from zinc plated steel.The square holes allow for filtration of any large pieces of garbage that may cause damage to a pump or pump system. Greenline Industrial Fitting...

4" Stainless J-Lock Clamp J213

The stainless steel J-Lock clamps are available in 3/8", 1/2", 5/8", and 3/4" band widths with sizing ranging from 3/16" inner diameter all the way up to 6".These non-punch type clamps are secured by...

4" Stainless Open End Punch Clamp PCO-16S

Open end punch clamps are of the same construction as our preformed clamps with the exception of being double wrapped and held to a specific diameter.Open end punch clamps are used when a fitting...

4" Stainless Punch Clamp PC-16S

The punch clamps are double wrapped and formed to a given diameter, with sizes ranging from 13/16" ~ 8" inner diameter.All of these clamps can be pulled down to a smaller diameter using a punch clamp...

4" Stainless Steel 316 Female NPT 90° Elbow G0898SS-400-400

These pipe fittings are all 150 lb. class type 316 stainless for schedule 40 pipe. Greenline Industrial Fitting Catalog

4" Stainless Steel 316 Male NPT Close Nipple G1616SS-400XC

These pipe fittings are all 150 lb. class type 316 stainless for schedule 40 pipe. Greenline Industrial Fitting Catalog New Greenline Industrial Fitting Catalog

4" Stainless Steel Hose Mender G20SS-400

Greenline Industrial Fitting Catalog New Greenline Industrial Fitting Catalog

4" Stainless Steel Worm Gear Hose Clamp G8-64

The Greenline G8 series clamps are completely stainless steel. The G8M clamps have a 5/16" wide type 301 stainless band with a type 410 stainless screw. G8 clamps have a 1/2" wide, 300 series...

4" Stainless Type A Male Camlock - Female NPT G65SSA-400

Stainless couplings are manufactured from type 316 stainless for maximum corrosion resistance.Care is taken at the factory to ensure a smooth finish on wetted surfaces to minimize bacteria build-up...

4" Stainless Type B Female Camlock - Male NPT G65SSB-400

Stainless couplings are manufactured from type 316 stainless for maximum corrosion resistance.Care is taken at the factory to ensure a smooth finish on wetted surfaces to minimize bacteria build-up...