Greenline

13-1/4" Steel Worm Gear Hose Clamp G7-212

The Greenline G7 series clamps are popular in the automotive industry, and feature a stainless band and screw housing with a plated carbon steel screw. G7M bands are 5/16" wide, and G7 bands are 1/2"...

13.00" Plated Steel Hose Sleeve G3S-1300

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13.19 - 15.00" Double Bolt Clamp G38-1450

These double-bolt clamps are made from plated ductile iron.In the smaller sizes (3/4" ~ 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation and general...

13.25" Plated Steel Hose Sleeve G3S-1325

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13.50" Plated Steel Hose Sleeve G3S-1350

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13.75" Plated Steel Hose Sleeve G3S-1375

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13/16" I.D. Plated Steel - Rubber Cushioned Tube Strap - 13/32" Bolt Hole G6-13

These manual connect and disconnect couplings are commonly used in fluid transfer applications where unrestricted flow and high operating pressures are desired.In 1/2" size, these couplers are also...

13/16" Plated Steel Open End Punch Clamp PCO-3

Open end punch clamps are of the same construction as our preformed clamps with the exception of being double wrapped and held to a specific diameter.Open end punch clamps are used when a fitting...

13/16" Plated Steel Punch Clamp PC-3

The punch clamps are double wrapped and formed to a given diameter, with sizes ranging from 13/16" ~ 8" inner diameter.All of these clamps can be pulled down to a smaller diameter using a punch clamp...

13/16" Stainless J-Lock Clamp J201

The stainless steel J-Lock clamps are available in 3/8", 1/2", 5/8", and 3/4" band widths with sizing ranging from 3/16" inner diameter all the way up to 6".These non-punch type clamps are secured by...

13/16" Stainless Punch Clamp PC-3S

The punch clamps are double wrapped and formed to a given diameter, with sizes ranging from 13/16" ~ 8" inner diameter.All of these clamps can be pulled down to a smaller diameter using a punch clamp...

13/16" Stainless Steel One Ear Pinch Clamp G1SS-21.0

Single-ear pinch clamps are an economical clamp for light duty low pressure applications. The band is 1/4" wide and 0.030" thick. Please note that the dash size given represents the size of the open...