Greenline

1/8" Hose Restraint Cable (1/2 - 1-1/4" Hose) G29R-125

Hoses can whip if they become accidentally uncoupled or tear away from the fitting.G29R hose restraint cables act to control whipping in the event of a failure.To function properly, restraint cables...

1/8" Male NPT Button Style Bleeder Valve 711

The push button bleeder valves allow for the simple push of a button to bleed compressed air lines or liquid systems. Greenline Industrial Fitting Catalog

1/8" Male NPT Nickel Plated Steel Breather Vent G1600VB-02

Commonly used on single acting cylinders or valves to prevent dirt and foreign particles from entering open ports, these fittings can also be found on gear boxes, storage tanks, and other areas where...

1/8" Male NPT Steel Exhaust Muffler w/ Bronze Filter G1600EM-02

The exhaust muffler features a bronze filter and attached to a standard pipe fitting. Primarily used to diffuse air and muffle noise from exhaust ports, air valves, or air tools to an acceptable...

1/8" Merchant Steel Female NPT Coupler G0808MC-013

Merchant couplings are also known as wrought iron couplings, but are actually made from merchant steel according to ASTM A865. The female threads are NPS straight tapped to 2" and taper tapped in...

1/8" MNPT Rubber Blow Gun Tip 202

Standard blow guns must only be used where air pressure is strictly regulated to 30 psi or less. For higher pressure air lines, safety blow guns must be specified. Safety blow guns feature a vented...

1/8" MNPT Safety Blow Gun Tip 209

Standard blow guns must only be used where air pressure is strictly regulated to 30 psi or less. For higher pressure air lines, safety blow guns must be specified. Safety blow guns feature a vented...

1/8" MNPT Siphon Spray Tip 221

Standard blow guns must only be used where air pressure is strictly regulated to 30 psi or less. For higher pressure air lines, safety blow guns must be specified. Safety blow guns feature a vented...

1/8" MNPT Vapour Spray Tip 203VST

Standard blow guns must only be used where air pressure is strictly regulated to 30 psi or less. For higher pressure air lines, safety blow guns must be specified. Safety blow guns feature a vented...

1/8" Nickel Plated Brass Push-To-Connect 90° Elbow G6090P-02

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

1/8" Nickel Plated Brass Push-To-Connect Plug G6100P-02

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

1/8" Nickel Plated Brass Push-To-Connect Tee G60T00P-02-02

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...