Greenline

1.90" Nylon Single Support Clamp G6SN-6-190

Pipe and tube support clamps consist of a steel weld plate, two clamp halves of green polypropylene or black nylon, and a plated steel cover plate, bolted together with hex bolts.These parts conform...

1.90" Polypropylene Single Support Clamp G6HD-6-190

Pipe and tube support clamps consist of a steel weld plate, two clamp halves of green polypropylene or black nylon, and a plated steel cover plate, bolted together with hex bolts.These parts conform...

1.902" - 2.085" Plastic Plug G9-21

These manual connect and disconnect couplings are commonly used in fluid transfer applications where unrestricted flow and high operating pressures are desired.In 1/2" size, these couplers are also...

1.91" Nylon Abrasion Sleeve NAS-191

These manual connect and disconnect couplings are commonly used in fluid transfer applications where unrestricted flow and high operating pressures are desired.In 1/2" size, these couplers are also...

1/16 x 1/8" Brass Male NPT - Female NPT Reducing Adapter G1608B-01-02

There is a large variety of brass pipe fittings for use in a wide range of applications. Our brass pipe fittings are forged, extruded, or cast depending on your needs. The cast brass fittings are all...

1/16 x 1/8" Nickel Plated Brass Male NPT - Push-To-Connect 90° Elbow G6096P-01-02

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

1/16 x 1/8" Nickel Plated Brass Male NPT - Push-To-Connect Connector G6016P-01-02

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

1/16 x 1/8" Steel Male NPT - Female NPT Reducer 1608-01-02

NPTF tapered pipe thread is commonly found in many industrial and agricultural markets across North America.Tapered threads seal by an increasing interference of the threads as the fitting is...

1/16 x 5/32" Brass Male NPT - DOT Push-To-Connect Connector G7016P-01-02.5

Push-to-connect fittings have several advantages over conventional compression style fittings. They are much faster to install, there are no loose nuts and sleeves to fiddle with during installation,...

1/16 x 5/32" Nickel Plated Brass Male NPT - Push-To-Connect 90° Elbow G6096P-01-02.5

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

1/16 x 5/32" Nickel Plated Brass Male NPT - Push-To-Connect Connector G6016P-01-02.5

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

1/16" Steel Male NPT Recessed Hex Plug 1600H-01

NPTF tapered pipe thread is commonly found in many industrial and agricultural markets across North America.Tapered threads seal by an increasing interference of the threads as the fitting is...