DMR

External SAE Phosphated Beveled Retaining Ring VSH-0750-PA

These rings look exactly like their SH counterpart except they have a 15º angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the...

External SAE Phosphated Beveled Retaining Ring VSH-0800-PA

These rings look exactly like their SH counterpart except they have a 15º angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the...

External SAE Phosphated Beveled Retaining Ring VSH-0850-PA

These rings look exactly like their SH counterpart except they have a 15º angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the...

External SAE Phosphated Beveled Retaining Ring VSH-0900-PA

These rings look exactly like their SH counterpart except they have a 15º angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the...

External SAE Phosphated Beveled Retaining Ring VSH-0950-PA

These rings look exactly like their SH counterpart except they have a 15º angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the...

External SAE Phosphated Beveled Retaining Ring VSH-1000-PA

These rings look exactly like their SH counterpart except they have a 15º angle on the outer edge. This combines with a complementary groove angle to eliminate end play by wedging itself between the...

External SAE Phosphated Bowed E-Clip Retaining Ring BE-0025-PA

Compensating for accumulated tolerances is what a BE retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or "preload" on the retained parts for the...

External SAE Phosphated Bowed Locking Retaining Ring EL-0025-PA

Another variation of a bowed E ring is the EL series. In addition to the bowed design used to eliminate "play" in an assembly, it also features two prongs which extend from the inner circumference to...

External SAE Phosphated Bowed Retaining Ring BSH-0100-PA

Compensating for accumulated tolerances is what a BHO retaining ring is designed to do on a shaft. Once snapped into the groove, bowed rings exert a force or "preload" on the retained parts for the...

External SAE Phosphated Curved Tooth "Push On" Retaining Ring TX-0100-PA

This ring features an outer rim with a series of prongs protruding into the centre. The ends create interference with the shafts when the ring is installed and a load is introduced on the other side...

External SAE Phosphated E-Clip Retaining Ring E-0004-PA

Perhaps the most popular and widely used radial retaining ring is the "E-clip" (So named because it is shaped like the letter "E") Three prongs make contact with the bottom of the groove and provide...

External SAE Phosphated E-Clip Retaining Ring E-0006-PA

Perhaps the most popular and widely used radial retaining ring is the "E-clip" (So named because it is shaped like the letter "E") Three prongs make contact with the bottom of the groove and provide...