Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 MSRP: Now: $110.46 Add to Cart Compare Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR05185 18.5mm HSS Two Tone Jobber Drill Bit DR05185 HSS 135° Degree split point (self-centering) which eliminates "walking" and reduces the thrust force needed Black and gold surface treatment for maximum lubricity Ideal for hand drilling and machine... MSRP: Now: $87.89 Add to Cart Compare Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR44685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR44685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $390.92 Add to Cart Compare Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR45685 18.5mm x #2 HSS Extra Long Morse Taper Drill Bit DR45685 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Various overall lengths / flute lengths available... MSRP: Now: $498.14 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR35185 18.5mm x #2 HSS Morse Taper Drill Bit DR35185 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $55.02 Add to Cart Compare Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR50585 18.5mm x 1/2" Reduced Shank HSS Prentice Drill Bit DR50585 HSS 118° Degree point with 3 ground flats on the shank for no-slip chucking Black and gold surface treatment for maximum lubricity 1/2" Standard reduced shank to expand the size range capacity of... MSRP: Now: $102.35 Add to Cart Compare Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR47875 18.75mm HSS Taper Length Drill Bit DR47875 HSS Straight shank Black oxide finish for increased wear resistance and added lubricity 118° Degree point Taper length drills have the same flute length as taper shank drills for deeper hole... MSRP: Now: $262.26 Add to Cart Compare Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK DR35187 18.75mm x #2 HSS Morse Taper Drill Bit DR35187 HSS 118° Degree point Black oxide finish for increased wear resistance and added lubricity Made to fit American standard (Morse) taper shank holders Recommended for general purpose use in a wide... MSRP: Now: $85.94 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC59518 18mm Cobalt 2 Flute Ball Nose End Mill MC59518 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $111.34 Add to Cart Compare Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC59618 18mm Cobalt 2 Flute Ball Nose End Mill MC59618 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Used for milling contours, radius bottom slots and die cavities 2 flute end mills provide increased chip capacity for higher feed... MSRP: Now: $174.97 Add to Cart Compare Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC55680 18mm Cobalt 2 Flute End Mill MC55680 Cobalt Center cutting Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting MSRP: Now: $64.54 Add to Cart Compare Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected × OK
Clarkson-Osborn | sku: CLK MC58680 18mm Cobalt 2 Flute Long End Mill MC58680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $107.66 Add to Cart Compare Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected
Clarkson-Osborn | sku: CLK MC38680 18mm Cobalt 2 Flute Long Threaded Shank End Mill MC38680 Cobalt Center cutting Longer overall length / length of cut Bright finish (TiN and TiCN coatings available) Designed for plunge cutting and slotting 2 flute end mills provide increased chip capacity... MSRP: Now: $110.46 Add to Cart Compare Previous 785 786 787 788 789 790 791 792 793 794 795 Next Previous 785 786 787 788 789 790 791 792 793 794 795 Next Compare Selected