Greenline

12mm Nickel Plated Brass Push-To-Connect Tee G60T00PM-12M-12M

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

12mm Nickel Plated Brass Push-To-Connect Union G6060PM-12M-12M

These fittings are recommended for use with Polyethylene, Nylon, and Polyurethane (Shore A 98) tubing. Male pipe ends on tees and elbows are swivel style to allow for easy orientation during...

12mm x 1/2" Steel Standpipe - Male JIC 61015-12-08

Unlike North American tube fittings, which rely on a flare for sealing, European fittings are designed with a ferrule which bites into the tubing when compressed by a threaded nut. DIN 2353 bite type...

12mm x 3/8" Steel Standpipe - Male JIC 61015-12-06

Unlike North American tube fittings, which rely on a flare for sealing, European fittings are designed with a ferrule which bites into the tubing when compressed by a threaded nut. DIN 2353 bite type...

13-1/4" Stainless Steel Worm Gear Hose Clamp G8-212

The Greenline G8 series clamps are completely stainless steel. The G8M clamps have a 5/16" wide type 301 stainless band with a type 410 stainless screw. G8 clamps have a 1/2" wide, 300 series...

13-1/4" Steel Worm Gear Hose Clamp G7-212

The Greenline G7 series clamps are popular in the automotive industry, and feature a stainless band and screw housing with a plated carbon steel screw. G7M bands are 5/16" wide, and G7 bands are 1/2"...

13.00" Plated Steel Hose Sleeve G3S-1300

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13.19 - 15.00" Double Bolt Clamp G38-1450

These double-bolt clamps are made from plated ductile iron.In the smaller sizes (3/4" ~ 2") they are popular for hydraulic suction lines, while larger clamps are often used for irrigation and general...

13.25" Plated Steel Hose Sleeve G3S-1325

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13.50" Plated Steel Hose Sleeve G3S-1350

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13.75" Plated Steel Hose Sleeve G3S-1375

Steel hose ferrules are used with a barbed hose fitting and are crimped on large-diameter hydraulic hose presses to create a strong, permanent, tamper-resistant hose connection. G3S Sleeves will work...

13/16" I.D. Plated Steel - Rubber Cushioned Tube Strap - 13/32" Bolt Hole G6-13

These manual connect and disconnect couplings are commonly used in fluid transfer applications where unrestricted flow and high operating pressures are desired.In 1/2" size, these couplers are also...