Greenline

1/4" (7/16"-24) Steel Male 45° SAE Inverted Long Flare Nut G0012SL-04

The brass Inverted Flare fittings are extruded, machined, or forged. Greenline Industrial Fitting Catalog New Greenline Industrial Fitting Catalog

1/4" 0° Angle 4.0 Orifice Pressure Wash Spray Tip PW-T00-4

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 0° Angle 5.0 Orifice Pressure Wash Spray Tip PW-T00-5

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 10000 PSI Two Wire Jack Hose 120J-04

A typical jack hose is 1/4" inner diameter with 3/8" male pipe ends and is usually 6 feet long.One pipe (NPT) end threads into the hydraulic hand pump, while the other end usually threads into a hand...

1/4" 10000 PSI Two Wire Jack Hose 250' Reel 120J-04

A typical jack hose is 1/4" inner diameter with 3/8" male pipe ends and is usually 6 feet long.One pipe (NPT) end threads into the hydraulic hand pump, while the other end usually threads into a hand...

1/4" 15° Angle 4.0 Orifice Pressure Wash Spray Tip PW-T15-4

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 15° Angle 5.0 Orifice Pressure Wash Spray Tip PW-T15-5

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 15° Angle 8.0 Orifice Pressure Wash Spray Tip PW-T15-8

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 25° Angle 4.0 Orifice Pressure Wash Spray Tip PW-T25-4

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 25° Angle 5.0 Orifice Pressure Wash Spray Tip PW-T25-5

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 25° Angle 8.0 Orifice Pressure Wash Spray Tip PW-T25-8

Spray tips are designated by the spray angle (a narrower angle produces more forces over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size.The...

1/4" 3/2 Port NPT Manual Shut-Off Valve SV651-04

Manual shut-off valves are used to relieve down stream pressure for servicing or maintenance.Dual front or back lockout handles ensure security while the 3 port, 2 position (3/2) construction vents...