Brass

3/8" Brass Compression Nut w/Captured Sleeve 61CS-6

If you ever need to terminate and seal off of a compression fitting and do not have the correct fitting such as the Fairview 61CAP- series, you can use a suitably sized metalic ball bearing between the compression nut and fitting instead of the crush...

1/4" Brass Compression Nut w/Captured Sleeve 61CS-4

If you ever need to terminate and seal off of a compression fitting and do not have the correct fitting such as the Fairview 61CAP- series, you can use a suitably sized metalic ball bearing between the compression nut and fitting instead of the crush...

1/2" Brass Metal Line Compression Sleeve 60-8

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

7/16" Brass Metal Line Compression Sleeve 60-7

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

3/8" Brass Metal Line Compression Sleeve 60-6

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

5/16" Brass Metal Line Compression Sleeve 60-5

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

1/4" Brass Metal Line Compression Sleeve 60-4

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

3/16" Brass Metal Line Compression Sleeve 60-3

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

5/32" Brass Metal Line Compression Sleeve 60-2-1/2

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

1/8" Brass Metal Line Compression Sleeve 60-2

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

7/8" Brass Metal Line Compression Sleeve 60-14

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...

3/4" Brass Metal Line Compression Sleeve 60-12

This single use brass crush sleeve is used for non DOT metal line installations only Do not use Fairview 60-2 ~ 60-14 series brass compression sleeves on poly-lines. The sleeves will cock sideways under compression and cut into the poly-line damaging...